+86 18020303133

Shanhe Road, Anzhen Street, Xishan, Wuxi, Jiangsu

All Categories
Titanium

Titanium

  • Titanium Gr1 Plate
  • Titanium Gr1 Plate
  • Titanium Gr1 Plate
  • Titanium Gr1 Plate
  • Titanium Gr1 Plate
  • Titanium Gr1 Plate
  • Titanium Gr1 Plate
  • Titanium Gr1 Plate

Titanium Gr1 Plate

Gr1 is a kind of industrial titanium. Gr1 titanium alloy is a new important structural material used in the aerospace industry. Its specific gravity, strength and service temperature are between those of aluminum and steel, but it has high specific strength and excellent resistance to seawater corrosion. performance and ultra-low temperature performance.

Specifications

In stock, can be customized according to customer requirements

Form

Plate, Strip,Bar,Tube

Classification

Titanium

Product Parameters

1)Chemical Composition

Grade

Chemical composition (weight percentage)

 Gr1

Chemical

(Ti)

(Fe)

(C)

(N)

(H)

(O)

Other impurities(Single)

Other impurities( sum)

commercially pure titanium

Balance

0.30

≤0.10

0.05

≤0.015

0.25

≤0.1

≤0.4

2)Physical properties:

 

 

Grade

Mechanical properties at room temperature, not less than

High temperature mechanical properties, not less than

 Tensile strength ob MPa

 Yield strengthσ0.2MPa

 Elongation δ5 %

 Shrinkage rate  ψ%

Impact value  ak J/cm2

 Test temperature 

Test temperature obMPa

 Persistent strengthσ  100 MPa

TA1

343

275

25

50

 

 

 

 

TA2

441

373

20

40

一一

 

 

 

TA3

539

461

15

35

 

 

 

 

TA5

686

一一

15

40

58.8

 

 

 

TA6

686

 

10

27

29.4

350

422

392

TA7

785

一一

10

27

29.4

350

490

441

TC1

588

一一

15

30

44.1

350

343

324

TC2

686

一一

12

30

39.2

350

422

392

TC4

902

824

10

30

39.2

400

618

569

TC6

981

 

10

23

29.4

400

736

667

TC9

1059

 

9

25

29.4

500

785

588

TC10

1030

 

12

25~30

34.3

400

834

785

TC11

1030

 

10

30

29.4

500

686

588

Application Scenario

Titanium alloy platesare non-magnetic metals that cannot be magnetized in large magnetic fields. They are also non-toxic and compatible with blood, so they are used in the medical field.
Titanium alloy plates are used to make aircraft engine compressor components:
Titanium alloy platesare used to manufacture rockets, missiles, and aircraft structural parts, aircraft frames, skins, engine parts, beams, etc.;
Titanium alloy platesare used to manufacture chemical heat exchangers, pump bodies, distillation towers and other chemical heat exchangers, valves, pumps, power station condensers, accelerators for petroleum refining and seawater desalination, and environmental pollution control devices that are corroded by seawater.

In the 1960s, the use of Da alloy began to move from the rear fuselage to the middle fuselage, and some of them were engaged in the manufacturing of important load-bearing components such as bulkheads, beams, and flap slide rails using structural steel. The amount of alloy used in military aircraft has increased rapidly, reaching 20% to 25% of the weight of the aircraft structure.

未标题-2

Production Process

The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:

  • Casting

    Casting

    Molten stainless steel and alloys are cast into large ingots or billets through a casting process.

  • Hot rolling

    Hot rolling

    During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.

  • Annealing

    Annealing

    Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.

  • Cold rolling

    Cold rolling

    Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.

Our Service

Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries, and more than 800 specifications.

Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.

  • Plate processing

    Machine cutting

    Sheet cutting

    plasma cutting

    Dynamic waterjet cutting

    sawing

    Plank leveling

    polishing

    laser cutting

  • Long product processing

    laser cutting

    production cutting

    Long product cutting

    Bar and structural cutting

    polishing

  • Value-added services

    Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.

    Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.

    Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.

Inquiry

Have questions about Wuxi Walmay Metal products?

Our professional sales team answers your questions within 24 hours.

GET A QUOTE
×

Get in touch