Monel K500 Alloy Sheet, China Monel K500 Alloy Sheet Manufacturers, Suppliers, Factory

Product Parameters

1）Physical properties

Density（g/cm³）	Magnetic	Thermal/w/(m.k) 100~900℃	Resistivity ℃)/（Ω.mm2/m)-20~900℃	Specific heat capacity ℃)/kg/(kg.k)℃-100~900℃	linear expansion coefficient /(10-6/k)-20~900℃
8.80		17.424-40.6	0.61~0.68	41.9-65.7	13-17.28
0/℃	21.1	371	427	482	538
HB	241	223	207	201

2）Chemical Composition

%	C	Mn	S	Ni	Cu	Fe	Ti	Al
Min	-	-	-	63.0	balance	-	0.25	2.0
Max	0.25	1.5	0.01	67.0	-	2.0	1.0	4.0

3）Mechanical properties

Variety	condition	Tensile Strength（ΣbMPa）	Elongation（A/%）	Hardness（HRB）
Hot rod	Hot processing state Cold drawn state	620~1070	20~45	75-35hrc
Hot rod	Hot processing state Cold drawn state	690~965	13~35	88-26hrc
Cold drawn plate	Cold rolling + annealing	620~725	25~45	≤85

4）Product form and execution standards

Product form and execution standards	product	ASTM	ASME	AME
	Sheets, plates, strips	B127	SB127	4544
	Seamless tube	B163.B165	SB163.SB165	4574
	welded pipe	B725	SB725
	Bars and cakes	B865	SB865	4675.7676
	Forged materials	B564	SB564	4675
	Wire			4370.4371

Application Scenario

Monel alloy sheet has excellent high-temperature resistance, corrosion resistance, and high strength properties and is used in a variety of demanding applications, including:

1. Chemical processing: Monel pipe is commonly used in the chemical industry in piping systems, valves, pumps, and heat exchangers that come into contact with corrosive chemicals.
2. Heat exchanger: Monel alloy tubes are used for heat exchanger pipes.
3. Oil and natural gas industry:
Monel pipe is used in offshore and onshore oil and gas applications including pipelines, downhole components, and seawater treatment systems.

Monel k-500 alloy sheet are mainly used to manufacture turbine blades and gas turbine blades on aero engines with operating temperatures below 750°C; used to manufacture fasteners and springs on ships; pumps and valve parts on chemical equipment; papermaking Squeegee blades on equipment, etc.

Production Process

The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:

Casting

Molten stainless steel and alloys are cast into large ingots or billets through a casting process.
Hot rolling

During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.
Annealing

Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.
Cold rolling

Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.

Our Service

Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries， and more than 800 specifications.

Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.

Plate processing

Machine cutting

Sheet cutting

plasma cutting

Dynamic waterjet cutting

sawing

Plank leveling

polishing

laser cutting
Long product processing

laser cutting

production cutting

Long product cutting

Bar and structural cutting

polishing
Value-added services

Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.

Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.

Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.

Specifications	In stock, can be customized according to customer requirements
Form	Plate, rod, pipe, strip
Classification	Nickel alloy

All Categories

Nickel Alloy