Monel K500 has the same corrosion resistance as Monel400, but has higher mechanical strength and hardness than 400. It also has better hot corrosion resistance and long-term organizational stability. However, the plasticity is slightly lower than that of Monel K500. Compared with Monel400, this alloy contains a mass fraction of 2.3% to 3.15% aluminum AL and 0.3% to 1.00% titanium Ti.
Specifications | In stock, can be customized according to customer requirements |
Form | Plate, rod, pipe, strip |
Classification | Nickel alloy |
Density（g/cm³） | Magnetic | Thermal/w/(m.k) 100~900℃ | Resistivity ℃)/（Ω.mm2/m)-20~900℃ | Specific heat capacity ℃)/kg/(kg.k)℃-100~900℃ | linear expansion coefficient /(10-6/k)-20~900℃ |
8.80 |
| 17.424-40.6 | 0.61~0.68 | 41.9-65.7 | 13-17.28 |
0/℃ | 21.1 | 371 | 427 | 482 | 538 |
HB | 241 | 223 | 207 | 201 |
% | C | Mn | S | Ni | Cu | Fe | Ti | Al |
Min | - | - | - | 63.0 | balance | - | 0.25 | 2.0 |
Max | 0.25 | 1.5 | 0.01 | 67.0 | - | 2.0 | 1.0 | 4.0 |
Variety | condition | Tensile Strength（ΣbMPa） | Elongation（A/%） | Hardness（HRB） |
Hot rod | Hot processing state Cold drawn state | 620~1070 | 20~45 | 75-35hrc |
690~965 | 13~35 | 88-26hrc | ||
Cold drawn plate | Cold rolling + annealing | 620~725 | 25~45 | ≤85 |
Monel alloy pipehas excellent high-temperature resistance, corrosion resistance, and high strength properties and is used in a variety of demanding applications, including:
1. Chemical processing: Monel pipe is commonly used in the chemical industry in piping systems, valves, pumps, and heat exchangers that come into contact with corrosive chemicals.
2. Heat exchanger: Monel alloy tubes are used for heat exchanger pipes.
3. Oil and natural gas industry:
Monel pipe is used in offshore and onshore oil and gas applications including pipelines, downhole components, and seawater treatment systems.
4. Food processing: Monel alloy pipe can be used in food processing equipment.
5. Marine industry: It is widely used in marine industries such as shipbuilding, offshore platforms, and seawater cooling systems.
6. Electrical industry: Monel alloy tubes are used in electrical components and wiring, especially in environments with high humidity and salt exposure.
The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:
Molten stainless steel and alloys are cast into large ingots or billets through a casting process.
During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.
Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.
Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.
Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries， and more than 800 specifications.
Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.
Machine cutting
Sheet cutting
plasma cutting
Dynamic waterjet cutting
sawing
Plank leveling
polishing
laser cutting
laser cutting
production cutting
Long product cutting
Bar and structural cutting
polishing
Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.
Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.
Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.
Our professional sales team answers your questions within 24 hours.
Wuxi Walmay Metal CO., LTD
EN
AR
FR
DE
RU
ES
ID
