Inconel 601 Alloy bar has excellent oxidation resistance at high temperatures and good carbonization resistance.
Inconel 601 Alloy bar has good mechanical properties and good stress corrosion cracking resistance at both room and high temperatures. Due to the controlled carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in areas above 500°C.
|
Specifications |
In stock, can be customized according to customer requirements |
|
Form |
Plate, rod, pipe, strip |
|
Classification |
Nickel alloy |
Density（g/cm³） |
Magnetic |
Thermal conductivity /w/(m.k) 20-300℃ |
Resistivity℃)/（Ω.mm2/m) 20~300℃ |
Specific heat capacity ℃)/J/(kg.k)℃ |
linear expansion coefficient /(10-6/k)100-300℃ |
8.11 |
|
11.2~16 |
1.18~1.22 |
448 |
13.75~14.58 |
ALLOY |
Ni |
Cr |
Fe |
C |
Mn |
Si |
Cu |
P |
S |
Al |
Mo |
Inconel 600 |
72 |
14-17 |
6-10 |
0.15 |
1 |
0.5 |
0.5 |
0.015 |
0.015 |
- |
- |
Inconel 601 |
61.5 |
22.5 |
14 |
0.05 |
0.3 |
0.2 |
- |
|
|
1.4 |
- |
Inconel 625 |
Remainder |
20-30 |
5 |
0.1 |
0.5 |
0.5 |
- |
0.015 |
0.015 |
0.4 |
8.0-10 |
Inconel 718 |
50-55 |
17-21 |
Remainder |
0.08 |
0.35 |
0.35 |
0.3 |
0.015 |
0.015 |
0.2-0.8 |
2.8-3.3 |
Variety |
Condition |
Tensile strength ΣbMPa |
Elongation A/% |
Reduction of area Z/% |
Bar hot |
processed state Solid solution |
585~825 |
61~15 |
|
|
550~790 |
|
||
Thin plate |
cold rolled state Solid solution |
790~1130 |
20~2 |
|
|
585~690 |
|
The metallographic structure of Inconel 601 Alloy bar: 601 has a face-centered cubic lattice structure.
Applications of Inconel 601 Alloy bar:
1. Trays, baskets, and fixtures used in heat treatment factories.
2. Steel wire split annealing and radiant tubes, high-speed gas burners, and wire mesh belts in industrial furnaces
3. Isolation tanks in ammonia reforming and catalytic support grids in nitric acid manufacturing.
4. Exhaust system components
5. Combustion chamber of a solid waste incinerator
6. Pipe supports and soot disposal components
7. Exhaust gas detoxification system components
8.Oxygen reheater
The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:
Molten stainless steel and alloys are cast into large ingots or billets through a casting process.
During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.
Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.
Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.
Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries， and more than 800 specifications.
Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.
Machine cutting
Sheet cutting
plasma cutting
Dynamic waterjet cutting
sawing
Plank leveling
polishing
laser cutting
laser cutting
production cutting
Long product cutting
Bar and structural cutting
polishing
Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.
Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.
Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.
Our professional sales team answers your questions within 24 hours.
Wuxi Walmay Metal CO., LTD
EN
AR
FR
DE
RU
ES
ID
