Incoloy 800 is a Fe-Ni-Cr-based solid solution strengthened deformation high-temperature corrosion-resistant alloy. It is used below 1000°C. Jinyu Metallurgy believes that Incoloy800 has excellent high-temperature corrosion resistance and good process performance. It has good structural stability and is suitable for processing and welding. It has good performance and is easy to form using both hot and cold processing. It is suitable for making parts under harsh corrosive media conditions and requiring high temperature and long-term operation.
Specifications | In stock, can be customized according to customer requirements |
Form | Plate, rod, pipe, strip |
Classification | Nickel alloy |
% | C | Si | Mn | Cr | Ni | Al | Ti | Fe | Cu | P | S |
Min | - | - | - | 19.0 | 30.0 | 0.15 | 0.15 | 0.15 | - | - | - |
Max | 0.1 | 1.0 | 1.5 | 23.0 | 35.0 | 0.60 | 0.60 | balance | 0.75 | 0.03 | 0.015 |
Density | Melting point | Specific heat capacity | Resistivity | Elastic Modulus |
8.0g/cm3 | 1350~1400℃ | 500J/kg.K | 0.93 | 200 Mpa |
Incoloy 800Hhas excellent stress corrosion resistance in water containing chloride and low concentration NAOH. It is widely used in manufacturing stress corrosion-resistant equipment, replacing 18-8 austenitic steel, and is used in pressure water reactor evaporators in the power industry. , high-temperature gas-cooled reactor, sodium-cooled fast reactor heat exchanger, and superheated steam pipe. In the chemical industry, it is used in HNO3 coolers, acetic anhydride cracking tubes, and various heat exchange equipment.
The corrosion resistance ofIncoloyis generally superior to that of nickel copper. It is more resistant to corrosion from reducing media than pure nickel and is more resistant to corrosion from oxidizing media than pure copper. It has very good corrosion resistance to sulfuric acid, phosphoric acid, and carbon.Incoloyalloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid, and their derivatives. At the same time, it is more corrosion-resistant than copper-based alloys in seawater.
Incoloyalso has very good corrosion resistance in moderately concentrated alkaline and salt solutions.
The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:
Molten stainless steel and alloys are cast into large ingots or billets through a casting process.
During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.
Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.
Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.
Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries， and more than 800 specifications.
Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.
Machine cutting
Sheet cutting
plasma cutting
Dynamic waterjet cutting
sawing
Plank leveling
polishing
laser cutting
laser cutting
production cutting
Long product cutting
Bar and structural cutting
polishing
Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.
Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.
Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.
Our professional sales team answers your questions within 24 hours.
Wuxi Walmay Metal CO., LTD
EN
AR
FR
DE
RU
ES
ID
