Inconel X-750 alloy rod is a corrosion-resistant, oxidation resistant, and high-strength precipitation hardening alloy, mainly composed of γ A nickel based high-temperature alloy that undergoes aging strengthening. Inconel X-750 alloy rods have good corrosion and oxidation resistance, high strength, good creep resistance, and good relaxation resistance. Inconel X-750 alloy rods also have good formability and welding performance. The alloy is pure austenitic in the solid solution state.
Specifications | In stock, can be customized according to customer requirements |
Form | Bar，Wire |
Classification | Nickel alloy |
Density（g/cm³） | Magnetic | Thermal conductivity /w/(m.k) 50-300℃ | Specific heat capacity | melting point | Elastic Modulus |
8.0 | - | 11.4-16.7 | 450~530J/kg.K | 1350~1370℃ | 200MPa |
% | C | Si | Mn | P | S | Cr | Mo | Ni | N | Cu |
Min | - | - | - | - | - | 26.0 | 3.0 | 30.0 | - | 0.7 |
Max | 0.02 | 0.7 | 2.0 | 0.03 | 0.01 | 28.0 | 4.0 | 32.0 | 0.11 | 1.5 |
Alloy 28 tubes (heat exchangers) are mainly used in wet phosphoric acid production. It is widely used in seawater, chemical processing containing F-HCL and production of organic acids. Incoloy 28 tubes (heat exchangers) are ideal materials to replace graphite heat exchangers when used in concentrated H3PO4. Incoloy 28 pipe is used in H2SO4 pipes for heat exchangers and acid gas delivery pipes.
1. Marine industry: Monel alloy bars are resistant to saltwater corrosion and are therefore commonly used in marine applications.
2. Chemical processing: Monel alloy bars are used in the chemical industry for heat exchangers, valves, pumps, and other equipment that come into contact with corrosive chemicals.
3. Aerospace industry:
Monel bars are used in aircraft components, especially where corrosion resistance is critical.
The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:
Molten stainless steel and alloys are cast into large ingots or billets through a casting process.
During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.
Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.
Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.
Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries， and more than 800 specifications.
Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.
Machine cutting
Sheet cutting
plasma cutting
Dynamic waterjet cutting
sawing
Plank leveling
polishing
laser cutting
laser cutting
production cutting
Long product cutting
Bar and structural cutting
polishing
Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.
Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.
Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.
Our professional sales team answers your questions within 24 hours.
Wuxi Walmay Metal CO., LTD
EN
AR
FR
DE
RU
ES
ID
