Hastelloy X (UNS N06002) Strip: High temperature resistant N06002 alloy is a nickel-chromium-molybdenum alloy with added cobalt and tungsten. N06002 Hastelloy has excellent oxidation resistance at high temperatures up to 1200°C and can also be used in neutral and reducing atmospheres. At the same time, N06002 alloy can resist carbonization and nitriding atmosphere. N06002 is a nickel-based high-temperature alloy with a high iron content that is mainly solid-solution strengthened with chromium and molybdenum. It has good anti-nutrition and corrosion resistance.
Specifications | In stock, can be customized according to customer requirements |
Form | Plate, rod, pipe, wire |
Classification | Hastelloy |
C | Si | Mn | P | S | Ni | Cr | Mo | W | Fe | Cu | Nb+Ta | Co |
|
|
|
|
|
| 21.0 | 6.0 |
| 18.00 | 1.5 |
|
|
0.015 | 0.50 | 1.00 | 0.020 | 0.01 | Balance | 23.5 | 8.0 | 1.5 | 21.0 | 2.5 | 0.5 | 5.0 |
Tensile strength (σb/MPa) | Yield point (σs/MPa) | Sample size | Elongation after break (δ5/%) |
590-770 | ≧335 | The sample blank size is 2.5mm | ≧10 |
N06002is a nickel-based high-temperature alloy with a high iron content that is mainly solid-solution strengthened with chromium and molybdenum. It has good anti-nutrition and corrosion resistance.
Hastelloy X (UNS N06002) Stripalloy application range:
1) Industrial and aviation steam turbines (combustors, rectifiers, structural covers);
2) Industrial furnace components, support rollers, grids, ribbons, and radiant tubes;
3) Spiral tubes in petrochemical furnaces;
4) High-temperature gas cooling nuclear reactor.
HastelloyPriority is given to pulsed arc welding. Before welding, the material needs to be in a solution-treated state to remove scale, oil stains, and various marks and marks. A wide area of about 25mm on both sides of the weld needs to be polished to a bright metal surface. Use low heat input, and the interlayer temperature does not exceed 100°C. No pre- and post-weld heat treatments are required.
The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:
Molten stainless steel and alloys are cast into large ingots or billets through a casting process.
During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.
Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.
Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.
Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries， and more than 800 specifications.
Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.
Machine cutting
Sheet cutting
plasma cutting
Dynamic waterjet cutting
sawing
Plank leveling
polishing
laser cutting
laser cutting
production cutting
Long product cutting
Bar and structural cutting
polishing
Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.
Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.
Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.
Our professional sales team answers your questions within 24 hours.
Wuxi Walmay Metal CO., LTD
EN
AR
FR
DE
RU
ES
ID
