+86 18020303133

Shanhe Road, Anzhen Street, Xishan, Wuxi, Jiangsu

All Categories
Hastelloy

Hastelloy

  • Hastelloy X Bar
  • Hastelloy X Bar
  • Hastelloy X Bar
  • Hastelloy X Bar
  • Hastelloy X Bar
  • Hastelloy X Bar
  • Hastelloy X Bar
  • Hastelloy X Bar

Hastelloy X Bar

Hastelloy-X alloy is a Ni-Cr-Fe based solid solution strengthened deformed high temperature alloy. Hastelloy-X alloy has moderate durability and creep strength below 900℃. Hastelloy-X is suitable for manufacturing components such as aeroengine combustion chambers for long-term use below 900℃, as well as high-temperature parts with operating temperatures up to 1080℃ for short-term use. .

Specifications

In stock, can be customized according to customer requirements

Form

Plate, rod, pipe, wire

Classification

Hastelloy

Product Parameters

1)Chemical Composition

C

Si

Mn

P

S

Ni

Cr

Mo

W

Fe

Cu

Nb+Ta

Co

 

 

 

 

 

 

21.0

6.0

 

18.00

1.5

 

 

0.015

0.50

1.00

0.020

0.01

Balance

23.5

8.0

1.5

21.0

2.5

0.5

5.0

2)Mechanical Property

Tensile strength (σb/MPa)

Yield point (σs/MPa)

Sample size

Elongation after break (δ5/%)

590-770

≧335

The sample blank size is 2.5mm

≧10

Application Scenario

Hastelloy X (UNS N06002) Stripalloy application range:
1) Industrial and aviation steam turbines (combustors, rectifiers, structural covers);
2) Industrial furnace components, support rollers, grids, ribbons, and radiant tubes;
3) Spiral tubes in petrochemical furnaces;
4) High-temperature gas cooling nuclear reactor.


Hastelloy-X alloy has been widely used in aerospace engines and civil industries for manufacturing aero-engine combustion chamber components, honeycomb structures, diffusers, tail nozzles, and other hot-end components. The cooling rate in the quenching process of finished Hastelloy-X alloy is one of the important factors affecting the alloying process. Rapid cooling can control the precipitation of grain boundary brittle carbide films. When the alloy solid solution temperature is higher than 1175°C, carbide films are also likely to form at the grain boundaries. alloy in
After long-term aging, a certain degree of age hardening occurs, resulting in a decrease in plasticity and a decrease in high-temperature strength.

Production Process

The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:

  • Casting

    Casting

    Molten stainless steel and alloys are cast into large ingots or billets through a casting process.

  • Hot rolling

    Hot rolling

    During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.

  • Annealing

    Annealing

    Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.

  • Cold rolling

    Cold rolling

    Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.

Our Service

Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries, and more than 800 specifications.

Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.

  • Plate processing

    Machine cutting

    Sheet cutting

    plasma cutting

    Dynamic waterjet cutting

    sawing

    Plank leveling

    polishing

    laser cutting

  • Long product processing

    laser cutting

    production cutting

    Long product cutting

    Bar and structural cutting

    polishing

  • Value-added services

    Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.

    Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.

    Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.

Inquiry

Have questions about Wuxi Walmay Metal products?

Our professional sales team answers your questions within 24 hours.

GET A QUOTE
×

Get in touch