J22 alloy strip is an iron-cobalt-vanadium soft magnetic alloy with high saturation magnetic induction intensity. Among the existing soft magnetic materials, this alloy has the highest saturation magnetic induction intensity (2.4T), a high Curie point (980°C), and a saturation magnetostriction coefficient. Maximum (60～100×10-6). Due to the high saturation magnetic induction intensity, when making a motor of the same power, the size can be greatly reduced. When making an electromagnet, it can produce a large attraction force under the same cross-sectional area.
Specifications |
In stock, can be customized according to customer requirements |
Form |
Plate,Strip,Bar,Wire |
Classification |
Expanded alloy |
Density（g/cm³） |
Electrical performance |
Oxidativeness: |
Hardness |
Elastic modulus |
Electrical resistivit |
|
8.2 |
980 Tc/℃ |
Easy to oxidize |
Soft HRB90 |
Cold hard HRC35 |
216 GPa |
(0.27μΩ·m) |
2）Chemical Composition
Alloy |
C |
Mn |
Si |
P |
S |
Cu |
Ni |
Co |
V |
Fe |
1J22 |
0.04 |
0.30 |
0.30 |
0.020 |
0.020 |
0.20 |
0.50 |
49.0～51.0 |
0.80～1.80 |
Balance |
3）Magnetic properties (after heat treatment)
|
variety
|
Magnetic induction intensity/T at different magnetic field intensities (A/M) |
CoercivityHC/(A/m) |
||||
B800 |
B1600 |
B2400 |
B4000 |
B8000 |
||
≥ |
≤ |
|||||
Strip |
1.8 |
2.0 |
2.1 |
2.15 |
2.2 |
128 |
Forged |
- |
- |
2.05 |
2.15 |
2.2 |
144 |
1J22 alloy stripis widely used in aviation and aerospace parts, micromotor rotors, electromagnet poles, relays, transducers, telephone headset diaphragms, etc.
1J22 alloy stripsare used in ordinary and superconducting magnets, electromagnets, small power transformers, chokes, cores of magnetic amplifiers, magnetic shields, rotors and stators of aircraft motors and generators, telephone vibrators, magnetostrictive transducers It is used in vibrators of ultrasonic generators, aviation power transformers, pole shoes and print heads.
1J22 alloy supply specifications: Bars, strips, forgings, wires, tubes, semi-finished products negotiated supply
1J22 alloy stripmaterial is delivered without heat treatment
The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:
Molten stainless steel and alloys are cast into large ingots or billets through a casting process.
During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.
Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.
Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.
Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries， and more than 800 specifications.
Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.
Machine cutting
Sheet cutting
plasma cutting
Dynamic waterjet cutting
sawing
Plank leveling
polishing
laser cutting
laser cutting
production cutting
Long product cutting
Bar and structural cutting
polishing
Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.
Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.
Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.
Our professional sales team answers your questions within 24 hours.
Copyright © Wuxi Walmay Metal Co., Ltd All Rights Reserved
EN
AR
FR
DE
RU
ES
ID
